| Patches, cal.30-50,.32-12, Flannel Soft, 60/round, 190 pcs. |
Recommendations for choosing GUNSON patches
- We release 80 patches.
- The shape is round and square.
- Fabric type: Soft, Hard, XB.
- Package size: 60-1250 pcs.
Patch selection by size:
- Our concept of saving resources and ecology, solvents and oils are toxic! Therefore, GUNSON recommends a reasonable minimum patch size, oil consumption is directly proportional to the area. For example .30 gauge can be cleaned #5 Patches, cal..24-.37, Flannel Soft, 35/round, 600 pcs. , or you can #20 Patches, cal..30-.37, Flannel Soft, 45/square, 600 pcs. , while the difference in area is more than 2 times, respectively, the consumption of chemistry is 2 times more, and this is not only money, but also your health, the health of loved ones.
The difference in the cost of patches is also significant, about 22%.
Many patches are suitable for several calibers, shooters have their own preferences: in terms of ramrod force, many factors influence this (visher diameter, patch size and type of material, barrel roughness, oils also have different coefficients of friction, representations of normal ramrod force too miscellaneous.
We consider normal effort 8-13kg.
For example, effort for 30 cal., Visher 6.3 mm, clean barrel, Croil oil:
#7 Soft circle 40mm approx. force 13kg
#5 Soft circle 35mm approx. force 9kg
#20 Soft square 35mm, approx. force 11kg
# Hard circle 40mm, approximate force 14kg
# Hard circle 35mm, approximate force 10kg
# Hard Square 35mm approx. force 12kg.
Cotton square 50mm, approximate force 14kg.
Cotton square 45mm, approximate force 8 kg.
Cotton circle 45mm, approximate force 11kg.
it should be taken into account that a strong compression of the patch leads to the impossibility of absorbing oil, a weak force on the ramrod leads to insufficient contact of the patch with the surface of the barrel.
What are the differences between Soft, Hard, XB
These are different fabrics with different properties.
-Soft flannel, soft, stretchy, patches from it are larger, respectively, they provide maximum absorption, and as the reverse side has a high chemical consumption, patches from Soft are suitable for solvents and oil-based oils such as Butchs, Eliminator, Ballistol, Gunex, Kroil.
-Hard flannel, relatively stiff, smaller patches, good absorption, has a moderate consumption of components for cleaning. ), Hard patches are suitable for all types of solvents and oil-based and water-based oils such as 1Choice, Butchs, Eliminator, Ballistol, Gunex, Kroil. etc.
-HB, cotton fabric, similar to collar fabric, it is a favorite choice of SPECIALISTS. Minimum price, sufficient absorption, minimum consumption of oils. ), XB patches are suitable for all types of solvents and oil-based and water-based oils such as 1Choice, Butchs, Eliminator, Ballistol, Gunex, Kroil. etc.
Choice of patch shape Round or Square.
Round patches with a diameter of 35mm and an analogue suitable for cleaning the same caliber square patches 35x35mm have an area smaller by 25%, while oil consumption is also 25% less, respectively, and less harm to the environment and health. In addition, round patches have less shedding of threads, the Square absorbs more oils and dirt from the barrel.
- Catalog of patches:
https://drive.google.com/open?id=1cvTYNFdHCkq1DhuhN36OZILhJUPe_Pgh
The choice of visher is an equally important element
The size of the patch is calculated based on the gap between the barrel and the visor, this gap is filled by the patch. Accordingly, it is important to choose a visher recommended for cleaning your caliber. Some experienced shooters will deliberately use smaller visors to increase patch size, but Gunson does not recommend this as there is a risk of the ramrod getting stuck in the barrel.
Catalog for visers:
https://drive.google.com/open?id=0B90MNf1JnoHrQ09TdWpxazJ0TmM
Price for GUNSON products:
https://drive.google.com/open?id=15K3wdIrYnfqvi2HcslUThtg9-nINTh1T
Photo video:
https://drive.google.com/open?id=1VXlE4lOn4VlNoNB_vaIhQGwtMrRNtqWb
Best Regards
GUNSON
